Maximum Load | Result | |
---|---|---|
Conventional | 1,900N | Partial separation of the adhesive between the blade and mounting |
Fukuju | 3,840N | Partial separation of the adhesive between the blade and mounting |
For leaving a fine finish on materials like diatomite.
Because of the laser slit etched into the mounting,
The flexibility is drastically improved.
Material | Stainless Steel |
---|---|
Thickness | 0.3mm (0.01in) |
Standard Sizes | 150mm/180mm/210mm (5.90in/7.09in/8.28in) |
How much curvature occurs using 100N (1N is approximately 0.1kg of force) |
Without laser slit | 5.0mm(0.2in) |
---|---|---|
With laser slit | 6.7mm(0.26in) |
For thinly applying foundational walls, and polishing cement walls.
Thanks to the laser slit cut into the mounting,
The flexibility is unsurpassed.
Material | Stainless Steel |
---|---|
Thickness | 0.4mm (0.02in) |
Standard Sizes | 240mm/270mm (9.45in/10.63in) |
How much curvature occurs using 200N (1N is approximately 0.1kg of force) |
Without laser slit | 7.8mm (0.31in) |
---|---|---|
With laser slit | 9.0mm (0.35in) |
For finely finishing materials like diatomite.
The rounded tip cleanly smooths over the tracks left in previous coats.
The flexibility is drastically improved.
Material | Stainless Steel |
---|---|
Thickness | 0.3mm (0.01in) |
Standard Sizes | 240mm/270mm/300mm/330mm (9.95in/10.63in/11.81in/12.99in) |